Adjustable 360 Degree Water Flow Drip Irrigation System 50PCS

- Strategically place the emitter stakes to keep the plant's root ball damp, but not soaked. - Adjust the flow for each plant and reevaluate each season based on plant size. - Use a timer to water twice a day for 5-10 minutes, depending on plant needs and weather. - Test the moisture to ensure it's reaching the desired areas. - Make the tubing easier to work with by soaking it in warm water or laying it out in the sun to soften. - Ensure a perfect seal around the barb of the emitter by holding the hole punch at a right angle when punching a hole in the tubing. - Flush the system before installing emitters to clear any debris. - Create your lateral lines before connecting them to the main line. - Cut the tubing longer than needed to avoid running short.

In addition, for containers and raised gardens with high water requirements, an automatic drip irrigation system is essential. These plastic irrigation drippers are 5.2 inches in total length, with a water outlet hole diameter of 0.05 inches and an irrigation angle of 360 degrees. They are suitable for 4/7mm (Inner/Outer diameter) tubing and each dripper has 8 outlet holes at the top.

Made of quality plastic, these drip emitters are black in color with a sharp bottom for easy insertion into the soil. The water flow can be adjusted by rotating the water outlet hole cap, allowing for customization based on specific plant needs, ultimately promoting healthy plant growth, conserving water, and saving money.

To connect, either link the drippers directly to the PE pipe or connect them to the 4/7 distribution tubing after softening the tube hole with hot water. These emitters are suitable for a wide range of applications, including pots, tubs, landscaped gardens, flower beds, vegetable gardens, herbs gardens, greenhouses, orchards, lawns, and self-plants.

product information: